LAUNCH X431 IMMO ELITE is the Most Comprehensive Key Programming Scan Tool combines with 2 Years Update,Professional Complete Key Programming,OE-Level All Systems Diagnostics, Bi-directional Control,39+ Reset Services, and Advanced Services etc.It is equipped with X-PROG3 key programming device to provide complete coverage of IMMO and programming functions,specially the ECU Module Clone: Cover Engine/Gearbox ECU Clone for 5000+ models and very easy to replace the new/used modules without complex & tedious operations.(You will not find it in other tools!)Together with the ability to quickly diagnose all modules of the majority of the makes and models on the market.
OE-Level All Modules Disgnosis: Launch X431 IMMO ELITE access and perform OE-Level diagnosis on all available vehicle modules including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, SCCM and etc and covers all major electronic systems like Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Self Leveling Suspension systems/Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems/Electronic Power Steering / Power Steering / Tyre Pressure /Intelligent Parking Assist/Door Motors/Audio systems/Air Conditioning/ Oil Service Reset / Sliding Doors / Electronic Throttle … and more.
Full OBD2 10 Modes: Support the full-model system-wide diagnosis of basic functions all 10 modes of OBDII standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test for global 110+ brands. And OBDII Code lookup tool and acronym database to assist and speed diagnosis and repair time.
39+ Most Commonly Used Reset Services:Includes all kinds of common maintenance and reset items for most models: (Note:You can Explore 100+ service functions by accessing menus of “Vehicle Brand > System Diagnostics > Special Function”)
- ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
- Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
- EPB(Electric Park Brake): Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
- DP.F(Diesel Particular Filter) Regeneration: Clear PM from the DP.F filter through oxidation or combustion to stabilize the filter performance.
- Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
- SAS(Steering Angle Reset)Reset: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
- Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
- Gear Learning:The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running
- SRS Reset: After replacing the Airbag, reset the Airbag data and clear the collision data.
- BMS Matching: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
- Crank Sensor/Crankshaft/Camshaft Relearn: It needs to be done after the engine has replaced the ECU and disassembled or replaced the timing belt assembly and crankshaft position sensor.
There are other special services including: ECU Reset, FRM Match, Clutch Match, Gateway Module Data Calibration, Rain Light Sensor, Turbo Match, TPMS(tire pressure)Reset, Air Suspension, Gearbox(Transmission) Match, Headlight Adjustment, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Language Change, EEPROM Adapter,Sunroof Initialization,Adblue Reset etc.Bi-directional Control: Put out the commands to ECUs,read the ecu data and monitor the operation of actuators.Through active tests,also called actuator tests,this bi-directional can precisely locate the car problems,letting you quickly know whether a specific system,component,or subsystem is functioning properly or not. For example, If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via the x431 immo elite, you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts.(Note: Functions are not all available and vary by vehicle!!!)
Support 95% Car Models Diagnostic Function and Immo Function such as:
Audi, BMW,Mercedes Benz,Sprinter,Peugeot Citroen,Toyota,Volvo,Porsche,Land Rover,Mitsubishi,Subaru,Honda,Nissan,Isuzu,Hyundai,Kia, BYD, Chrysler,GM,Ford,Maserati,Mazda, Jaguar,Renault,Fiat,Ferrari,Roewemg,Opel,Suzuki,Baichs,GWM,LIEBAO,CHANGHE,CHDAIHATSU,COWIN,DFPV and more.
- 1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
- 2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
- 3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
- 4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
- 5. Supports BMW E chassis 8HP gearbox ECU program wiping.
- 6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
- 7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECBENCH mode clone.-Bosch engine ECU: ME17,MED17,EDC17,MEVD17, etc. – Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc. -Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
- 8.Supports Engine & Gearbox ECU Clone for 5000+ Models(You can not find this in other tools): LAUNCH x431 immo elite supports ECU Cloning,to allow you to backup & restore the data and clone it into the new Engine/Gearbox ECU.
Why Choose Launch X431 IMMO ELITE?
1.It can be used with a variety of LAUNCH X-431 products, no need to bind, flexible to use, and a wide range of adaptation.
2.Integrated multi-function module, one machine with multiple functions, high cost performance.
3.Powerful functions, support Mercedes-Benz Infrared keys reading and writing, BMW engine ISN code reading, BENCH mode reading engine and other functions and more.
4.Reading and writing data is fast and accurate.
5.It is a powerful chip reading,matching and writing programmer.
6.It is suitable for professional users in the automotive electronics industry/locksmith/maintenance shop.