Launch CRP808 Read BMW 2015 fault code

LAUNCH CRP808  supports system-wide basic diagnostic functions including reading DTC, clearing DTC and reading data stream, and 5 common service and reset functions.

Here share how to use Launch CRP808 to read fault code on BMW 2015.

Procedures:

Enter Launch CRP808 Menu

Click “OBD II”

In process, please wait…

SCAN RESULTS as below, then click “OK”

Select “Read Data Stream”-> “Read Status After DTCS Cleared”

Click “Diagnose”-> “BMW”

Read Vehicle Version information as below

Click “Automatically Search”

It shows vehicle information and configuration

And then click “NEXT”

Select “System Scan”

Select “Health Report”

LAUNCH CRP808 PRO read BMW fault code

Click “Report” to continue

BMW fault code report shows successfully

Done!

Learn more: Launch CRP808 Review

Launch Creader 123E OBD2 Scanner Review

Launch Creader 123E OBD2 Scanner Review:

Launch Creader 123E is an evolutionary smart solution for passenger car diagnosis. It can update version for CRP123 and Creader VII+.CRP123E, also supports the system diagnosis of ABS.SRS, ENG and AT system.

What’s the advantage of Launch CRP123E?

Smart (Auto-Detect) Diagnosis:

Once the tool and the vehicle are properly connected, the system starts auto-detect process. Once the whole process is successfully finished, a diagnostic report will be automatically generated and sent to your email box (if bound).

Manual Diagnosis:

If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes: Value, Graph and Merged).

OBD II Diagnosis:

10 modes of OBD II test are supported, including EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing etc.

One-click Update:

Let you update your diagnostic software and APK online.

Diagnostic History:

This function provides a quick access to the tested vehicles and users can choose to view the test report or resume from the last operation, without the necessity of starting from scratch.

Diagnostic Feedback:

Use this option to submit the vehicle issue to us for analysis and troubleshooting.

DTC Library:

Allow you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.

Displays battery real-time voltage once properly connected to the vehicle.

What’s the specification of X431 CRP123E OBD2 Code Reader?

Screen: 5’inch Touch Screen
RAM: 1G
ROM: 8GB
Battery: 4000mAh rechargeable Li-battery
OBD II input voltage range: 9~18V
Charging via: DC 5V charging cable or Diagnostic cable through connection to vehiclersquos DLC
Dimension: 228mm x 125mm x 34.5mm
Working temperature: -10 to 50deg C (14 to 122 deg F)
Storage temperature: -20 to 70deg C (-4 to 158 deg F)

Which cars can Launch Creader 123E support?

Launch Creader 123E supports many different car brands as the following form.

1 For VW 20 For NISSAN 39 For EOBD2
2 For VOLVO 21 For MITSUBISHI 40 For Dodge
3 For Vauxhall 22 For Mini 41 For DEMO
4 For USA FORD 23 For MAZDA 42 For DAEWOO
5 For TOYOTA 24 For Lincoin 43 For DACIA
6 For Tisuzu 25 For Lexus 44 For CITROEN
7 For SUZUKI 26 For LANDROVER 45 For CHRYSLER
8 For SUBARU 27 For Lancia 46 For Chevrolet
9 For SPRINTER 28 For KIA 47 For Cadillac
10 For SMART 29 For JPISUZA 48 For Buick
11 For SKODA 30 For Jeep 49 For BUGATTI
12 For SEAT 31 For JAGUAR 50 For BMW
13 For SAMSUNG 32 For Infiniti 51 For BENZ
14 For SAAB 33 For HYUNDAI 52 For AUTOSEARCH
15 For RENAULT 34 For HONDA 53 For AUST FORD
16 For PORSCHE 35 For GMSA 54 For AUDI
17 For PEUGEOT 36 For GM 55 For Alfa Romeo
18 For OPEL 37 For FIAT 56 For ACURA
19 For NissanGTR 38 For Euro FORD 57 For Abarth

 

Launch CRP Touch Pro 5.0″ All Include: Review, User Manual, Update, Download

Launch crp touch pro 5.0″ all include: review, user manual, update, download, etc.

Launch crp touch pro 5.0″ uk

http://www.eobdtool.co.uk/wholesale/launch-creader-crp-touch-pro.html

 

Launch crp touch pro 5.0″ user manual

Ship to the user with the package, the instruction manual with much more details, and includes quick start.

 

Launch crp touch pro 5.0″ update

Tap “Update” icon to update on official site

 

Launch crp touch pro 5.0″ compare with Autel EBS301, Autel OLS301M, Launch CRP129, Maxicheck Pro, Autel MD802, Launch CRP Touch.

 

launch crp touch pro 5.0″ good reviews:

  1. good tool for the DIY home mechanic. It will clear abs, airbag, and CEL.
  2. Crp touch pro works great, shows code definition and turns off check engine light
  3. work on my 03 Silverado, it works lots of. 100% recommended
  4. Good tool for professionals, It has excellent make and model coverage and is very user friendly.
  5. high quality, easy software upgrade.

 

  1. Nice tool, very easy to use, and so convenient to register , you do not have to activate it.
    Diagnosed my car 2008 e90 bmw 328i well and tested the ABS and SRS, as well as the brake system.I am so glad that my ca is still fine. I also bought a BMW adaptor, this connector fit my car well.
    No problems of using it. A nice try. Give it A++++

 

  1. Can operate electronic calipers in the rear.

 

  1. Launch CRP Touch Pro diagnose Ford Focus 2002 Successfully:

What I want to mention as below:

Launch CRP Touch Pro has a nice carrying case which protect the machine from damaged. I have several pieces of similar code readers which has poor ability and I have to hold computer with me. The pretty good is the instruction manual with much more details, and includes quick start. Also the diagnostic cable and power adapter.

All of these are contained in this nice case.

 

After turn on the CRP Touch Pro, you can hear the sound, it has microphone, it is very enjoyable, something like using an iPad, iPhone.

 

CRP Touch Pro is multi-functional, designed user-friendly.

 

the touch screen is very incredible quick responsive to move

 

Allows user to read vehicle info by automatically search and manually select, automatically search is quick than manually search, if it fails to reads vehicle info by automatically search, you have to manually select.

 

I have to mention the option “read data stream”, we do have hundreds of parameters available. Very important feature here is graphing, all the graphing display in the same page. Here you could click the graph to see clearly, it is kind of nice.

If you can’t understand the meaning, you could click the lower button to check it.

 

Launch CRP Touch Pro is not good at:

Launch CRP Touch Pro scanner wont cycle the abs module for brake bleeding purpose. It scans the abs and tell you if a sensor has failed or the module ; you don’t have to guess which sensor went bad ; it lets you know each sensor separated right front left or right or rear right ir left.

 

How to use Launch crp touch pro 5.0″ for setting, update, download car software?

Turn on Launch Creader CRP Touch Pro 5.0″

 

Go to Apps menu

Tap “Google settings” to set wi-fi, sound, display, storage, battery.

Tap “Apps” to the downloaded apps, select “CRP T&P” to uninstall.

Back to APPS menu, Tap “Home button”.

Connect the USB to the bottom port of CRP Touch Pro.

Tap the “USB” icon to install CRP T&P

 

Click on the “Home” icon and go to APPS, the CRP T&P icon displays on the screen, click on it to start launch CRP Touch Pro.

 

Have launch CRP Touch Pro function menu shown as below.

 

Tap “Diagnostic” for loading vehicles: American, European and Asian.

 

To update “Demo”

 

Updating.

 

Power off CRP Touch Pro, then power on it.

Go on diagnosing…

 

That’s all