How to update X431 PAD III V2.0 and Change Language

How to update X431 PAD III V2.0:

To update the diagnostic software, tap “Yes” to enter the vehicle software download screen. Tap “Update” to start downloading. To pause downloading,
tap “Stop”. To resume, tap “Continue”. When download is complete, the system will install the software package automatically.

Note: When downloading the diagnostic software or checking for updates, make sure the tablet has a strong Wi-Fi connection. It may take several minutes to finish it, please
be patient to wait.
To download and install the software later, tap “No”. In this case, enter the Home screen and tap “Software Upgrade” to download the diagnostic software.
B. If you have registered to be a member, input your name and password, and then tap the “Login” button to enter the main menu screen directly.

Note: The X-431 PAD III has an auto-save function. Once the username and password are correctly entered, the system will automatically store it. After initial setup, it is no
longer necessary to input the account information manually to log in.
C. If you forgot the password, tap “Retrieve password” and then follow on-screen instructions to set a new password.

How to change language X431 PAD III V2.0:

X-431 PAD III supports multiple languages. Follow the steps below to change language:
1.On the home screen, tap on Settings-language& input-languages.
2.Tap on “add a language”, and then choose the desired language from the list.
3.Tap and hold the desired language and drag it to the top of the screen and then release it,

the system will change into the target language.

Find More: X431 PAD III V2.0X431 PAD III V2.0 User Manual

Launch X431 PAD III V2.0 registration and activation procedure


This article is available how to register and activate Launch X431 PAD III V2.0 in step by step procedure.


1How to register Launch X431 PAD III V2.0?

Register from the home screen, tap “Settings”.



Go into “Login” at the left corner.

Tap “New registration”

Note: please supply your real information to obtain better service.

x431-pad-iii-v2-0-registration-and-activation-02 x431-pad-iii-v2-0-registration-and-activation-03 x431-pad-iii-v2-0-registration-and-activation-04


Here you are going to create an user name and password.


Once your username and password is created, you are going to enter an email.



2How to activate Launch X431 PAD III V2.0?

When you get to activate VCI, please take note, there will be an activation kit inside, the box along with the scanner, you will need the card to activate it, so here you will have serial number and activation code.



Once you register that info you click on “Activate”. And you will finish registration.



Done. Ready to use Launch X431 PAD 3 V2.0.


Thank you for reading and stay tuned for more Launch devices.

How to update internal memory for Launch X431 V+?

This article is available with the method to increase internal memory for Launch X431 V+ . Check the step-by-step guide below.

Open Launch X431 V+ main menu

Select “ES” icon to check the current internal storage

Power off the X431 V+ scan tool

Remove the device soft shell with special tool

Remove the screws

This is memory card slot

Insert a new large-capacity memory card into Launch X431 V+ (pro 3)

Power on the Launch diagnostic tool

Select “SanDisk SD card”

Set up your SanDisk SD card according to your need

1.Use as portable storage (For moving photos and other media between devices)

2.Use as internal storage (For storing anything on this device only, including apps and photos. Requires formatting that prevents it from working with other devices)

That’s all! Hope it helps!